Enter a message name below to show all available translations.
Found 2 translations.
| Name | Current message text |
|---|---|
| h English (en) | {| !Command !Request !Response |- |read byte from MCMTII's EEPROM |'J', address, 0, 0, 0 |the_byte from EEPROM |- |read all from MCMTII's EEPROM (setup data) |'K', 0, 0, 0, 0 |48 bytes, containing the EEPROM's content as described below |- |saving setup (write to EEPROM) |'L', address, one or two data bytes (see below) |none |- |get MCMTII's version |'V', 0, 0, 0, 0 |a string up to 80 characters |- |rowspan="4"|flash EEPROM (put device in special programming mode) |'M', 0, 0, 0, 0, followed by data: |none |- |dev_id (initialize transfer) |EB (IDACK) |- |E3 (WRITEBOOT), address high, address low, length (10), checksum, {10 bytes data} |E7 (DATA_OK), E4 (WOK) (success) |- |ED (DONE), {whatever?} |E4 (WOK) (success) |} |
| h French (fr) | {| !Command !Request !Response |- |read byte from MCMTII's EEPROM |'J', address, 0, 0, 0 |the_byte from EEPROM |- |read all from MCMTII's EEPROM (setup data) |'K', 0, 0, 0, 0 |48 bytes, containing the EEPROM's content as described below |- |saving setup (write to EEPROM) |'L', address, one or two data bytes (see below) |none |- |get MCMTII's version |'V', 0, 0, 0, 0 |a string up to 80 characters |- |rowspan="4"|flash EEPROM (put device in special programming mode) |'M', 0, 0, 0, 0, followed by data: |none |- |dev_id (initialize transfer) |EB (IDACK) |- |E3 (WRITEBOOT), address high, address low, length (10), checksum, {10 bytes data} |E7 (DATA_OK), E4 (WOK) (success) |- |ED (DONE), {whatever?} |E4 (WOK) (success) |} |